Kentec’s Sigma A-CP range of conventional fire control panels have now been UL listed. The competitively priced A-CP is designed for small installations, including outdoor shopping areas with less than 24 fire detectors per zone and stand-alone sprinkler rooms.
The Sigma A-CP range, with its optional built-in communicator, is available with 2, 4 or 8 initiating circuits, which can be extensively configured via a simple front panel operated programming method.
The low standby power requirements and cost effective small batteries allow the panel to be mounted in a small discrete, which is available in standard red or optional grey. A simple programming method using just 3 front panel buttons allows an extensive list of configuration options to be set and reviewed.
Single board construction, which allows easy removal of all electronic parts by the removal of just 2 screws and ample provision of cable entry knockouts, simplifies installation. 4 Amp notification appliances power and built in selectable sync protocols provide ample power and control for a wide range of standard notification appliances. The built in RS485 communications bus provides the facility to connect 4 wire annunciators or ancillary relay boards to provide further indication and control options throughout a premises. The optional DACT allows dual line reporting to central stations and provides a 500 event history buffer.
To download the Sigma A-CP datasheet, Click here.
Kentec Electronics Ltd
Units 25-27 Fawkes Avenue,
Kent. DA1 1JQ United Kingdom
+44 (0)1322 222121
Calls may be recorded for training and quality purposes