| Edition | |
Subjects |
44
 |
|
GUIDE V3.1 release Loop Explorer V6.006 |
43
|
|
Syncro / Syncro AS Firmware Release - V6.2 New Features Returns Policy Revised for 2010 |
42
|
|
GUIDE – Windows configuration recommendations Loop Explorer V6.005 |
41
|
|
Cable segregation in fire detection systems Panel Firmware downloads available on the Kentec Web site |
40
|
|
Syncro & Syncro AS Panels - Pre-alarm events in cause and effects Syncro Programming Lead (S187) Revision Syncro Zone Card – Zone Fault reporting |
39
|
|
Syncro / Syncro AS Major Firmware Release – V6.1 New Features |
38
|
|
Sigma CP and Sigma XT+ control panels – Additional features added. Syncro Expansion Card and Network card address setting. |
37
|
|
Loop Explorer Version 6.00 Release. Syncro AS Year 2010 date bug. Syncro XT panel firmware update. |
36
|
|
Syncro Display and Loop Card
compatibility. Repair Prices for non-warranty items. Apollo Loop Calculator. |
35
|
Syncro
V5.94 / Syncro AS V5.25 Firmware Release. |
|
34
|
Syncro
Panel power connection, Syncro AS Panel –
Daylight Saving Adjustment Issue, Loop Sounder
Tones for Cause and Effects |
|
33
|
Level
2 Training introduced for 2009. Loop Explorer
V4.94 update. |
|
32
|
Loop
Explorer V4.93. Loop Offset Facility. |
|
31
|
Syncro
4-way Conventional Zone Card – K545 –
Test Mode Operation. |
|
30
|
Loop
Explorer V4.92. 24 volt D.C. outputs in Kentec
products. |
|
29
|
Syncro
Open Ended Network. System Faults on Fire Control
panels. |
|
28
|
Syncro
V5.91 / Syncro AS V5.23 Firmware - New Features. |
|
27
|
Service
Replacement Items – Firmware Request Facility. |
|
26
|
Syncro / Syncro AS panel update procedure. Sigma XT manual update. |
|
25
|
Loop
Explorer V4.90 Release. |
|
24
|
Sigma
XT Firmware - New Features. |
|
23
|
Kentec
USB Lead – Configuring the serial port. |
|
22
|
Syncro
V5.70 / Syncro AS V5.20 Firmware New Features. |
|
21
|
Syncro Display Card Compatibility. Sigma Si - Local Inputs. |
|
20
|
Signifire – Spare Parts availability. Syncro Open Ended Network Option. |
|
19
|
Syncro AS Lite. Sigma CP Sounder Card – Panel Firmware Compatibility. |
|
18
|
Returned
Materials - Authorisation Policy and Procedure. |
|
17
|
Syncro – Support for Argus Vega wireless detection devices and Auto Addressing. Sigma CP – Revised repeater configuration information. |
|
16
|
Sigma CP, Two wire systems. Signifire MCPU and DCI Repairs. |
|
15
|
Sigma
XT – Configuration Option 29. |
|
14
|
Apollo Loop Calculator – Revised Syncro panel information. Sigma CP – Sounder Card Expansion Capability. |
|
13
|
Loop Explorer Version 4.6 - Syncro AS Single Loop control panels. Sigma CP – New Firmware Features. |
|
12
|
Syncro - New Firmware Release (Version 5.5). Loop Explorer configuration transfer issues. |
|
11
|
Syncro V5.4 Update – Hochiki ACB-E type support. Sigma CP – 3 wire adaptation. |
|
10
|
Syncro – New Firmware Release (Version 5.4). Sigma XT – Extinguishing Flooding Fault. |
|
9
|
Delayed outputs - EN54 part 2 requirements. Extended Warranty Period and Service Replacement Items |
|
8
|
Kentec Addressable Control Panels - 400mA Loop Current. Sigma Si Status Units - Monitored Mode & Hold Inputs. |
|
7
|
Addressable Loop Beacon Devices. Syncro AUTOLEARN facility. |
|
6
|
Syncro Focus Repeaters - Correct mains suppression. EN54-2 Approved Panels - Delays to outputs. |
|
5
|
Sigma XT and K2.01 product comparison. Syncro View - Local LCD control panel repeater. Syncro I/O. |
|
4
|
Syncro with Access Key Option - Approved. Kitemarked Syncro Panels - Spares part numbers. LCMU and zone resistance. |
|
3
|
Software update - Loop Explorer V4.5 Panel Configuration Utility. Syncro panel update. Suppression of inductive loads. |
|
2
|
Syncro V4.3 Release. ENS400 Thermistor Connection. Loop Calculators. Adapting 3-wire systems to K3000 Control Equipment - Technical bulletin TB1007 |
|
1
|
Introduction to In the Technical Loop. Syncro "EN" panel amendments. "EN" panel network compatibility |
