| Edition |
Date
|
Subjects |
36
 |
26.10.09
|
Syncro Display and Loop Card
compatibility,
Repair Prices for non-warranty items, Apollo Loop
Calculator |
35
|
03.08.09
|
Syncro
V5.94 / Syncro AS V5.25 Firmware Release. Sigma
SI zone indicators on Sigma XT+ panels. Extended
technical support hours
|
34
|
19.05.09
|
Syncro
Panel power connection, Syncro AS Panel –
Daylight Saving Adjustment Issue, Loop Sounder
Tones for Cause and Effects
|
33
|
31.3.09
|
Level
2 Training introduced for 2009. Loop Explorer
V4.94 update.
|
32
|
08.12.08
|
Loop
Explorer V4.93. Loop Offset Facility.
|
31
|
29.10.08
|
Syncro
4-way Conventional Zone Card – K545 –
Test Mode Operation.
Syncro Event Log - Download Facility.
|
30
|
6.10.08
|
Loop
Explorer V4.92. 24 volt D.C. outputs in Kentec
products.
Write enable switch in Kentec products.
|
29
|
26.8.08
|
Syncro
Open Ended Network. System Faults on Fire Control
panels.
|
28
|
1.8.08
|
Syncro
V5.91 / Syncro AS V5.23 Firmware - New Features.
Kentec Line Continuity Monitoring Unit (LCMU). |
27
|
30.6.08
|
Service
Replacement Items – Firmware Request Facility.
Apollo XPander devices on Syncro / Syncro AS
Panels.
K2.01 / K4.01 weatherproof Status Units. |
26
|
22.5.08
|
Syncro
/ Syncro AS panel update procedure. Sigma XT
manual update. |
25
|
15.4.08
|
Loop
Explorer V4.90 Release.
Syncro V5.90 / Syncro AS V5.22 Firmware New
Features. |
24
|
4.12.07
|
Sigma
XT Firmware - New Features.
Syncro
V5.80 / Syncro AS V5.21 Firmware New Features. |
23
|
2.11.07
|
Kentec
USB Lead – Configuring the serial port.
Syncro
Communication Module. |
22
|
26.9.07
|
Syncro
V5.70 / Syncro AS V5.20 Firmware New Features.
Syncro Split Protocol Implementation. |
21
|
26.6.07
|
Syncro
Display Card Compatibility. Sigma Si - Local
Inputs. |
20
|
18.5.07
|
Signifire
– Spare Parts availability. Syncro Open
Ended Network Option. |
19
|
23.4.07
|
Syncro
AS Lite. Sigma CP Sounder Card – Panel
Firmware Compatibility. |
18
|
19.3.07
|
Returned
Materials - Authorisation Policy and Procedure.
First Stage Sounders on Multi Area Extinguishing
Systems. |
17
|
19.2.07
|
Syncro
– Support for Argus Vega wireless detection
devices and Auto Addressing. Sigma CP –
Revised repeater configuration information. |
16
|
19.1.07
|
Sigma
CP, Two wire systems. Signifire MCPU and DCI
Repairs. |
15
|
21.12.06
|
Sigma
XT – Configuration Option 29.
Syncro
AS – System Fault. |
14
|
20.11.06
|
Apollo
Loop Calculator – Revised Syncro panel
information. Sigma CP – Sounder Card Expansion
Capability. |
13
|
16.10.06
|
Loop
Explorer Version 4.6 - Syncro AS Single Loop
control panels. Sigma CP – New Firmware
Features. |
12
|
20.9.06
|
Syncro
- New Firmware Release (Version 5.5). Loop Explorer
configuration transfer issues. |
11
|
18.8.06
|
Syncro
V5.4 Update – Hochiki ACB-E type support.
Sigma CP – 3 wire adaptation. |
10
|
20.7.06
|
Syncro
– New Firmware Release (Version 5.4).
Sigma XT – Extinguishing Flooding Fault. |
9
|
13.6.06
|
Delayed
outputs - EN54 part 2 requirements. Extended
Warranty Period and Service Replacement Items |
8
|
16.5.06
|
Kentec
Addressable Control Panels - 400mA Loop Current.
Sigma Si Status Units - Monitored Mode &
Hold Inputs. |
7
|
13.4.06
|
Addressable
Loop Beacon Devices. Syncro AUTOLEARN facility. |
6
|
13.3.06
|
Syncro
Focus Repeaters - Correct mains suppression.
EN54-2 Approved Panels - Delays to outputs.
|
5
|
13.2.06
|
Sigma
XT and K2.01 product comparison. Syncro View
- Local LCD control panel repeater. Syncro I/O. |
4
|
13.1.06
|
Syncro
with Access Key Option - Approved. Kitemarked
Syncro Panels - Spares part numbers. LCMU and
zone resistance. |
3
|
15.11.05
|
Software
update - Loop Explorer V4.5 Panel Configuration
Utility. Syncro panel update. Suppression of
inductive loads. |
2
|
7.9.05
|
Syncro
V4.3 Release. ENS400 Thermistor Connection.
Loop Calculators. Adapting 3-wire systems to
K3000 Control Equipment - Technical bulletin
TB1007 |
1
|
19.7.05
|
Introduction
to In the Technical Loop. Syncro "EN"
panel amendments. "EN" panel network
compatibility |
