Edition 5
 

New Extinguishant
Release Panel

International Fire Expo 16th-19th May 2005

Kentec will be exhibiting at the forthcoming International Fire Expo show which takes place at the NEC in Birmingham.

Over the past year we have embarked upon the most extensive product development program in the history of our company. As a result we will be showing for the first time many new products & others which have been upgraded and enhanced.

New Products include:
1. Extinguishant Release Panel.
2. True Addressable Extinguishant Releasing System
3. Low cost Repeater for Syncro System.

Upgraded/Enhanced Products include:
1. Sigma 2 Conventional Fire Control Panel.
2. Syncro Focus and Focus+ Panels.

Preview Products include:
1. New Single Loop Analogue Addressable Panel.
2. New Multi Area Conventional Extinguishant C/P.

Our stand is G60 located in Hall 17 we look forward to seeing you there.

To register online for the exhibition:
Exhibition Hall Map:

MIOU
Multi/Output Unit

4 Zone Conventional Detection Board

Are You Using "I/O" Effectively

Analogue addressable fire systems are becoming increasingly "I/O" intensive as more functionality is required in modern fire detection systems.

Sensor manufacturers generally have a good range of "I/O" modules available, however the number of inputs and outputs is sometimes limited with I/O intensive applications requiring several large and expensive modules mounted or installed at a single location. Syncro "I/O" offers a cost effective solution.

The Kentec Syncro system was conceived with the growing need for I/O in mind and can provide an additional 512 channels of network wide, configurable I/O on each individual control panel via an onboard RS485 bus.

For the full story:

New for 2005 - In the Technical Loop
(Starts April 2005)

As we mentioned in the last edition of In the Loop, we will soon be launching In the Technical Loop for up to date technical information. ITTL will include FAQ's, engineering tips on Kentec products, firmware updates & lots more.

To subscribe follow this link:

Note - If you already receive technical & software bulletins from Kentec Electronics Ltd, you will automatically receive this new publication.

For back issues of In the Loop newsletters

If you feel a colleague may benefit from receiving In the Loop they can register on the front page of our web site for their own future copy.

Kentec Electronics Ltd.
Tel: +44 (0)1322 222121 Fax: +44(0)1322 291794